TumblerForge — free tumbler wrap templates (blank)
========================================================

Every template here is true physical size and comes straight out of the
TumblerForge Studio — the same artboard you get when you open the app.

  .svg     1 unit = 1mm. LightBurn, xTool Creative Space, Illustrator,
           Inkscape, Silhouette Studio, Cricut Design Space.
  .lbrn2   Native LightBurn project.
  .xs      Native xTool Creative Space project.

In the .lbrn2 and .xs files the whole template — lines, labels and all — sits
on the CUT layer. Set that layer's output to OFF before you run the job: it is
an alignment reference, not artwork to burn.

Each template is the full wrap. The width is the circumference at the widest
engraveable point and the height is the engraveable band. There is 40mm of
overdraw on each side so you can design past the seam; the seam itself is the
left edge of the wrap.

Sizes in this pack:
  40 oz Tumbler              315mm around × 240mm tall
  30 oz Flip Tumbler         285mm around × 210mm tall
  30 oz Handle Tumbler       280mm around × 211mm tall
  22 oz Sports Water Bottle  245mm around × 199mm tall
  20 oz Skinny Tumbler       245mm around × 195mm tall
  20 oz Travel Tumbler       277mm around × 144mm tall
  16 oz Tumbler              250mm around × 126mm tall
  10 oz Mug                  275mm around × 100mm tall

Free to use, including commercially. No attribution required.
More sizes, 3D mockups and one-click exports: tumblerforge.makerfoundryco.com
