— 285mm × 210mm · free, no signup

30 oz Flip Tumbler wrap template

A true-size wrap template for the 30 oz Flip Tumbler, measured off a real blank — 285mm around the widest engraveable point by 210mm of engraveable height.

— free template, no signup

285MM × 210MM

True-size 30 oz Flip Tumbler wrap template — 285mm around by 210mm of engraveable height, plus 40mm of overdraw on each side so you can design past the seam. Free for commercial use, no attribution.

Section heights, per-band circumferences, centre and quarter lines, handle keepouts.

LightBurn and xTool files put every guide on the cut layer — switch that layer’s output off before you run the job.

30 oz Flip Tumbler wrap dimensions

  • Wrap width (circumference): 285.0 mm
  • Engraveable height: 210.0 mm
  • Engraveable band: 0–210 mm from base
  • Tapered body: 285 mm at the rim, 225 mm at the base
  • Overdraw margin: 40 mm each side

This cup tapers, so a single rectangle will distort. The annotated template splits the wrap into top, transition and bottom sections and gives the circumference of each — design to the section you're actually engraving.

Which file do I want?

— every size in one zip

All 8wrap templates, all three formats, plus a README listing every dimension. Downloads straight away — we don’t email it to you.

You’ll join the TumblerForge list — new sizes, new features, unsubscribe anytime. Individual templates above need no email.

30 oz Flip Tumbler blanks & 3D mockups

Every plating in this size — see it engraved on a live 3D preview and find the blank.

Other sizes

Or skip the template entirely

Drop your art onto the 30 oz Flip Tumbler in the Studio, see it engraved on a spinning 3D cup, and export a production file that's already the right size. The demo needs no account.

Try the demoOpen in the Studio